Over the years the trend for electric gates has become a more common feature for most houses, rather than just a privilege for the rich and wealthy. These have developed from being merely just a fancy accessory to spruce up the appearance of one's home, and are a necessary tool for creating a secure barrier for one's home. These are mostly seen at the front of larger houses and mansions rather than in small terraced or semi detached houses. However, with houses like these, they very often have smaller wooden fences surrounding the external part of the vicinity.
Whilst some electric gates may be perceived as pretentious and intimidating, they are on many levels a necessary feature for most homes. These include listed buildings, establishments and of course homes for the odd celebrity. Wrought irons gates are designed to make it difficult for intruders to make their way in and repel any suspicious activities. Therefore, if they do look like an impenetrable obstacle, then it is serving its very purpose of being a simple security system.
For people looking into install gates for their home there are a few points that they must be aware of before going ahead with the process. Installing front gates is not just a simple process and may take some time to organise prior to the installation process. The first key important factor to remember is what kind of electric gate do you want installed? There are various styles and designs available that all too often people may feel confused over when shopping for new gates.
Swing gates are commonly used and are standard for most installations and come in two variations. A single swing electric gate allows the user to open one panel, whilst a double swing electric gate allows you to open two halves simultaneously or separately. They can be made from wrought iron, steel or copper, which are often expensive. Alternative materials are wood or aluminium, which are not as strong as iron, but do the job just as well.
A curved security barrier is more commonly seen in parking areas of a public building, or where there is ample space for a driveway. These are made up of bars which are controlled by electric motors, locks, openers and other varying security systems. These stand out from other electric gates, because they can move up or down, and can block an entranceway vertically. They can prevent larger vehicles from passing through, providing a height restriction even after being raised, and they also provide a smaller clearance for the driveway, controlling the amount of vehicles that pass through at any one time.
Another more expensive, yet highly effective electric gate is the sliding gate. These are more expensive because they are more time consuming and complicated to install. There are two ways in which the sliding gates are installed, one is by attaching them to wheels and onto a sliding frame, and the other is a much more commonly used method which is by a cantilever. The latter is a much more efficient method as the wheels never make contact with the ground and are instead placed on the third bar meaning it will not be prone to deterioration. These can slide in one or two directions, however the wider the driveway the more expensive they are to install.
The final type of electric gate is one that is not common and has sparked up much attention is the expandable electric gate. These allow the user to increase or expand the size by up to 20 feet, which gives the person control of their driveway space at any time they wish. Normally those who install these electric gates own horses and those who need to monitor their animals more easily. However, many users have found them to be useful if they have more than vehicle to accommodate for.
The above information should clear up the confusion over which gate to decide upon. The best thing to do is to seek advice from a professional and reputable agency that installs electric gates in homes. It is also important to go through the safety precautions once the gates have been fitted, how to use them with kids around and how often they need to be maintained. Many gates would need a three to six month check up, so as to avoid serious problems and malfunctions.
Anna Stenning is an expert on electric gates, having knowledge and insight into what type of gates are available to consumers and safety precautions behind using them.