You may wake up one day to a 25°c temperature outside and realize that its a good day for you to go outside for a ride. Once you decked out in some great gear to start off your days you find that you have trouble with starting your Harley Davidson. Now the first thing you probably going to imagine you have is that you’re lowing on fuel. But once you’ve got that sorted out you realize that you have trouble with the starter of the motorcycle. A Harley starter problem is something you face within the first few years of having a stock build starter. These are notorious in failing within the first few years of acquiring them.
All Is Not Lost: It’s Time To Push Start This Bad Boy
In this situation, you have an option outside of jumping the battery: the push start. Also called a “bump start”, “roll start”, or “pop start”, the push start turns the engine over in the hopes that the engine will start. Once started, the alternator runs the electrical components (at least, on modern bikes).As it so happens, push starting your bike is pretty easy and even easier when you know what you’re doing. Let’s get down to it.
First, Check These Things If Your Motorcycle Won’t Start
If your bike refuses to start, you will need to look into a couple of things that might prevent your motorcycle from running properly.
Check The Ignition Kill Switch
The kill switch is connected in series with the ignition switch. If your bike won’t start, make sure the kill switch is not open or is set to the ‘STOP’ position.
Check The Fuel Level
It can happen to anyone. If your bike refuses to start, you should check the fuel level and make sure that you have enough gas to carry on. Do you have a faulty fuel gauge? Pop open the fuel cap and see for yourself.
Check The Fuel Petcock
This is for non-EFI/fuel injected bikes. Make sure that the fuel tap petcock is set to OFF.
Check The Kickstand
As an added safety feature, most bikes will not start if the kickstand is down and the motorcycle is in gear. Make sure that the kickstand is up before attempting to start your bike.
Check The Starter
As mentioned above stock built Harley starters are more prone to face problems within the initial years. If you have a starter testing kit, you may give that a try or you may need to check for weird sound when turning on the starter. If you confirm that starter makes strange sounds when turning your motorcycle on, you may need a new one.
Make Sure That You’re In Neutral
Double check to make sure that your gear is set in neutral before starting the bike.
If your motorcycle still won’t start after checking the above-mentioned tips, then you will need to jump start your ride.The procedure is the same as push starting a car. The basic premise is to engage a gear while holding the clutch pedal, get the bike rolling, and release the clutch. This will turn the engine over, so you can get back on the road.It may take a few attempts to get going and once you do make sure you’re headed straight to the service centre to get things looked at.
HarleyStarterDrives.com offer the best quality Harley starters at very affordable prices. Buy some of the best Harley starter replacement from us.