Homeowners can do them easily. You need to periodically perform some tests and inspections to ascertain the good working of the door. If you are not comfortable with these regular tasks, call trained service technicians to do them from time to time. However, remember that garage doors are highly technical components and you must not attempt to repair them yourself without the necessary implements and skill. You must never hesitate to call in a professional Garage Door Repair Mississauga company attend on them. Now, read on to know what garage door regular maintenance tasks await you.
Inspect them once a month
Once in a month, do this simple test to ascertain that the garage door is working properly. Stand inside the garage. Let the door be closed. Check the components of garage door like springs, rollers, cables, pulleys, mounting components like hinges and others for any indications of wear or tear. Check whether the cable has worn or frayed. Inspect to know whether the mounting hardware has gone loose. If you find any one or more of these problems, it is a sure sign that the issue might turn serious. Therefore it is time that you call in a professional to do the repairs and replacements.
Perform balance test
If your garage door is fitted with an automatic opener, then do the garage door balance test once in a month. First close the door and then disconnect the automatic opener. If you can manually lift the door, do it. If you are able to open it smoothly without any frictions and to the full extent, then the door is in good working condition. If you find it difficult to open or open fully, then call in a professional to check it any remedy the possible faults.
Test the reversing mechanism
When you are operating the garage door with an automatic opener, you must perform this reverse mechanism test once in a month. The federal laws enacted in the year 1993 require the homeowners to equip their doors with the reversing mechanism as a safety measure by fitting photo eye sensors. This will help prevent accidental entrapment. If your system does not have this feature, immediately you must replace your garage door. To perform the reversing mechanism test, do the following. Let the door be fully opened. Place a block of wood on the floor in the center location where the garage door will touch the floor. Close the door using the garage door opener. If the door automatically reverses upon slightly contacting the wooden block, if the door does not reverse upon striking the block, then you must check the working of the door and get it serviced by a technician. Hence, you must not overlook the regular garage door inspection. By meticulously keeping track of the good working of your garage door, you can see it work faultlessly for years.